We don't recommend a direct hook up to the stove itself. You can plumb "make up air" to within the vicinity of the stove to feed it several ways. The easiest would be to use an externally mounted dryer vent type of clam shell (w/o the flap)and then trim out the 4" through wall pipe penetration with an adjustable butterfly vent.
https://www.fisheriessupply.com/sea-dog-line-butterfly-vent-with-side-knob
A/NSW
Hi A, Not too worried with the close proximity of air flow from windows, and proper final install. Just been reading about other ways. She is a dream to warm my home with, learning the most optimal air flow.
Best,
Allyson